立即申请 »

Product Engineer(产品工程师)

职位编号:  9944
集团:  Magna Mechatronics, Mirrors & Lighting
分支机构:  CoE - Mechatronics Asia
职位类型:  永久/正式
地点: 

Suzhou, CN

1.    Generally assigned to components, sub-assemblies and systems, e.g. be  responsible for  changes
按新的客户要求,新的项目环境进行分析,并给出子零件,分总成或总成的设计要求。同时也参与新技术的应用开发。
2.    Engages in design and product development of automotive closure systems, including door latches and   
       actuators, window moving mechanisms, door modules, and powered closures.    
负责Mechtronics部门所负责汽车零件的应用开发。如:锁,执行器,摇窗机,门模及电动系统零件。
3.    Coordinates the complete development for the designated products including, but not limited to design,   
合作完成所负责零件的应用开发,不局限于设计,也要按项目开发的流程去支持生产,测试。
4.    Incorporates customer requirements, regulations and product specifications into the design of the 
       designated products, ensuring compliance with operational, cost, timing, safety, reliability, quality, 
       and manufacturing feasibility parameters.          
结合客户的要求,法规及产品规范,确保自己所负责零件符合生产,成本,时间,安全,可靠性,质量及可制造性的要求
5.    Analyzes products and formulates engineering conclusions by the application of engineering and/or 
       mathematical principles and tools.  Applies QFD, FEA, FMEA, DOE, VA/VE and DFM/DFA, 
       as required in the development of the product.        
根据工程及学术理论,对产品进行分析并给出工程结论。熟知QFD,FEA,FMEA,DOE,VAVA及DFM/DFA工具
6.    Writes/compiles engineering content for the following deliverables: engineering specifications and 
       documentation, including DVP&R’s, 8D’s, GD&T, BOM, prototype control plans,   
       key product characteristics, engineering changes and work orders.      
编制工程技术文件,如设计规范,DVP&Rs, 8D,BOM,样件控制计划,产品特殊特性清单及工程更改文件。
7.    Consults and collaborates with personnel in various engineering and design activities relative to product 
       development requirements in order to create/support robust design methods to  eliminate prior campaign 
        failure modes.              
主导跨部门协调合作以确保设计的可靠性,在开发初期消除产品潜在失效风险  
8.    Conducts effective communications within the project team and the customer, supplier, manufacturing 
       and quality communities. Even able to coach other CFT members.Maintains all appropriate documentation.
与跨部门成员进行有效的沟通,包括客户,供应商,生产及质量控制部门。对项目小组成员进行技术指导,确保技术文件
按要求进行归档处理。            
9.   Often provides both recommendations and support for design solutions to design personnel.  
给合作的设计工程师提供建议和需要的支持        
10.  Supports CAE activities (hand calculations/first order analysis). Fundamental understanding and ability   
       to apply/utilize basic math based tools.          
支持CAE计算所必需的输入,能够应用基本的数学模型工具去辅助CAE人员进行分析。
11.  Works as experienced engineering personnel to support and drive best practices in design specifications, 
       manufacturing processes, customer requirements, and safety requirements    
作为有经验的设计工程师去主导总结在写设计规范,制造流程,客户偏好及安全要求等方面的经验
12.  Creates, reviews and approves engineering direction and designs to ensure key deliverables are met 
       (i.e. cost targets, timing, safety, reliability, quality, and manufacturing feasibility parameters).   
定义,评审,批准工程产品的设计方向,确保满足项目的各项要求(成本,时间,安全,可靠性,质量及可制造性)
13.  Reviews, approves, completes, and submits required change notices to ensure design outputs meet 
       design inputs.              
根据设计输入,评审,批准,完成及递交所需的工程更改,以确保满足设计目标  
14.  Understands and follows existing policies, procedures, work instructions and standards and makes 

       recommendations for continuous improvements.

根据对现有产品,设计标准,设计规范的理解,推荐持续改进产品的策略

       
                 
岗位概述

Product Engineer

关键职责

1.    Generally assigned to components, sub-assemblies and systems, e.g. be  responsible for  changes.

2.    Engages in design and product development of automotive closure systems.

3.    Incorporates customer requirements, regulations and product specifications into the design of the designated products, ensuring compliance with operational, cost, timing, safety, reliability, quality.

4.     Analyzes products and formulates engineering conclusions by the application of engineering and/or mathematical principles and tools.  Applies QFD, FEA, FMEA, DOE, VA/VE and DFM/DFA, as required in the development of the product.

5.    Writes/compiles engineering content for the following deliverables: engineering specifications and  documentation, including DVP&R’s, 8D’s, GD&T, BOM, prototype control plans, key product characteristics, engineering changes and work orders.

6.     Consults and collaborates with personnel in various engineering and design activities relative to product   development requirements in order to create/support robust design methods to  eliminate prior campaign  failure modes.

7.    Conducts effective communications within the project team and the customer, supplier, manufacturing   and quality communities. Even able to coach other CFT members.Maintains all appropriate documentation.

关键资质/要求

1)  Bachelors degree (or higher) in Engineering or related field.

2)  Target 5+ years of diversified engineering experiences.

3)  Strong communication skills in both Chinese and  English: verbal and written

4)  Requires good team work, and good people skills with customers and suppliers

 

其他信息

1)  Ability to apply academic and other engineering principles in the development of automotive

2)  Excellent competence in CAD and 2-D drawing reading, competency in GD&T.

3)  Great organizational skills and the ability to successfully complete multiple tasks within established and changing deadlines.

4)  Great skills with independent problem solving and presentations.

 

立即申请 »